home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19950329-19950528
/
000117_news@columbia.edu_Mon Apr 10 13:54:44 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-07-31
|
3KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA24471
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Wed, 12 Apr 1995 12:30:11 -0400
Received: by apakabar.cc.columbia.edu id AA16643
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Wed, 12 Apr 1995 12:30:05 -0400
Path: news.columbia.edu!spcuna!solaris.cc.vt.edu!news.alpha.net!news.mathworks.com!news.bluesky.net!news.sprintlink.net!howland.reston.ans.net!vixen.cso.uiuc.edu!uwm.edu!msunews!harbinger.cc.monash.edu.au!yoyo.aarnet.edu.au!goliath.camtech.com.au!gateway.dircsa.org.au!gateway.dircsa.org.au!not-for-mail
From: arthur@gateway.dircsa.org.au (Arthur Marsh)
Newsgroups: comp.protocols.kermit.misc
Subject: Re: kermit over ethernet in dos ?
Date: 10 Apr 1995 23:24:44 +0930
Organization: DIRCSA - Disability Information and Resource Centre
Lines: 69
Message-Id: <3mbdb4$pa8@gateway.dircsa.org.au>
References: <3lvavp$tca@pirates.cs.swt.edu>
Nntp-Posting-Host: gateway.dircsa.org.au
X-Newsreader: TIN [version 1.1 PL8]
Apparently-To: kermit.misc@watsun.cc.columbia.edu
Tom F McCabe (tm@astros.cs.swt.edu) wrote:
: I recently downloaded the new kermit 3.14 and
: successfully run it over Novell's LANWP
: tcpip.exe and telapi.exe. However, in reading
: the documentation in seems to imply that you don't
: need the tcpip.exe or telapi.exe to run ckermit;
: that is it implies that the equivalent functions
: are in ckermit 3.14. Is that correct?
You've just about answered one of my questions.
I gather that telapi.exe is in LAN WorkPlace, but
not included with the TCP/IP transport that comes
with the Netware Client Kit for DOS/Windows?
: When I try the following:
: 1. Put all the appropriate definitions in
: my mscustom.ini - such as domain,
: subnetmasks, etc.
: 2. Load the lsl and ethernet driver (exp16odi)
: 3. run kermit 3.14
: 4. In ckermit type: set port tcp/ip nyssa.swt.edu
: connect
: I get the error:
: Cannot access ip type packets
: Unable to initialize tcp/ip system, quitting
: Am I doing something obvious that's wrong? Do i need to
: initialize other stuff?
: Any help will be appreciated?
You can either run the LANWP TCP/IP, or someone else's or
Kermit's built-in TCP/IP, but only one at a time.
A typical net.cfg for a Netware 3.12 client with VLM's and
using Kermit's built-in TCP/IP would look like:
protocol KERMIT
bind NE2000
Link Driver NE2000
Int 5
Port 300
Frame Ethernet_802.2
Frame Ethernet_II
Protocol IP 0800 Ethernet_II
Protocol ARP 0806 Ethernet_II
; Protocol RARP 8035 Ethernet_II
; RARP doesn't work with my host
First Network Drive F
Link Support
Buffers 6 1600
MemPool 2048
; Change to suit your network card, Interrupt, port address...
Then do the SET TCP/IP parameters as required in your MSCUSTOM.INI
and a set port TCP/IP <ip address> to get connected.
--
Arthur Marsh, telephone +61-8-370-2365, fax +61-8-370-2133, +61-8-223-5082
arthur@gateway.dircsa.org.au
.endofsig